Flat, metal and coated roofs for Kleberg County's county seat, with the city permit and windstorm inspections handled.
Kingsville is the county seat of Kleberg County, the home of Texas A&M University-Kingsville and the city beside Naval Air Station Kingsville. RISE Roofing works on the commercial roofs that keep all of that running: apartment buildings, retail centers, restaurants, offices, churches, and the barns and shops on ranch land around town.
The first visit costs you nothing. We inspect the roof, photograph what we find, and send a written quote, typically 24 to 48 hours later, with a price that stays fixed from the day you sign. Kleberg County is part of the state's windstorm catastrophe area, so the city permit and the TDI windstorm inspections are part of our job, not extra chores for you.
Kingsville lies about 40 miles southwest of Corpus Christi on U.S. 77, well inside the 50-mile area our Corpus Christi office serves. Whether you manage one storefront or a block of student apartments, you get the same inspection, the same written quote and the same warranty as an owner in the city.
Kingsville was surveyed in 1903 on land about three miles east of the King Ranch headquarters and named for the ranch's founder, Richard King. The first regular passenger train on the St. Louis, Brownsville and Mexico Railway rolled through on July 4, 1904. The town incorporated in 1911 and became the seat of the newly organized Kleberg County in 1913, according to the Handbook of Texas.
Two institutions came later and stayed. South Texas Teachers College opened in 1925 and became Texas A&M University-Kingsville in 1993; the university describes a main campus of about 250 acres with more than 80 buildings. A naval air station opened in 1942, closed after the war and reopened in 1951. The Texas Comptroller counted 1,802 direct employees at Naval Air Station Kingsville in 2023, where the Navy runs undergraduate pilot training in the T-45 Goshawk.
The Celanese Corporation started a plant north of town in 1944, and Kingsville grew into a trade center for farm and ranch families. Today the city puts its own population at about 25,000 and says its retail trade area takes in nearly 50,000 people. That adds up to a wide spread of roofs for a town of its size.
Student housing, small apartment complexes, strip centers and restaurants account for much of the commercial roof area in Kingsville. Most of them sit under low-slope roofs behind short parapet walls, where trouble stays out of sight until a tenant reports a stained ceiling.
TPO roofing is a common answer for these buildings. The white membrane bounces back a large share of the sunlight that hits it, and hot air fuses the seams together instead of glue. RISE holds a manufacturer certification for TPO, and the TPO systems we install can come with a 20-year manufacturer material warranty.
Kitchens change the math. Grease carried up by an exhaust fan breaks down many membranes over time, while PVC resists it far better, so PVC is usually the stronger pick for a restaurant roof. Our TPO vs. PVC guide lays out the differences.
On a rental building, timing matters as much as material. We can plan a tear-off around move-in weeks or school breaks, give tenants notice through the property manager and keep entrances and parking open while crews are on the roof.
The City of Kingsville requires a building permit for every new roof and re-roof. Its permit guide says the application needs the property's appraisal card and a WPI-1 windstorm form, and it lists small repairs to the roof covering, under 100 square feet in total and not touching the decking or framing, as work that needs no permit. The details are in the city's permit guide.
That WPI-1 links the city permit to state rules. Kleberg County is one of the 14 first-tier coastal counties in the Texas Department of Insurance catastrophe area, so most re-roofs and roof repairs there must be built to TDI's standards and inspected. When the work passes, TDI issues a WPI-8 certificate of compliance. Owners who insure through the Texas Windstorm Insurance Association will usually be asked for it.
The state standard changed in 2026. Starting April 1, 2026, WPI-1 applications must be certified under the 2024 International Residential Code or International Building Code, according to TDI's adopted codes page. We check what the current code asks of your building before materials are ordered, then line up the inspections and file the permit ourselves.
Here is everything we offer Kingsville property owners, with a link to the full page for each service and roof system.
Services for Kingsville buildings
Roof systems we install in Kingsville
Kingsville grew up as a trade town for farm and ranch families, and the buildings on those properties are mostly metal: hay barns, equipment sheds, shops and storage buildings. Their exposed-fastener roofs leak in the same handful of places as they age, around screws, end laps, ridge caps and clear skylight panels.
When the panels are still solid, a fastener-and-seam repair or a full roof coating can keep a barn dry for years. When the steel has rusted through, new metal panels are the fix. Standing seam lasts roughly 50 to 70 years and keeps its fasteners out of the weather; R-panel, a common choice on ag buildings, runs about 30 to 40.
Churches and older office buildings in town often have pitched roofs too. Standing seam suits them for the same reasons it suits a barn: no screws exposed to the sun and a service life measured in decades, which matters to a congregation that would rather not fund another roof in 20 years.
Kleberg County's place in the catastrophe area covers the whole county, not just the city limits, so ask us about the windstorm inspection for a ranch building too.
An inspection starts on the ground. We ask where water has shown up inside, how old the roof is and what repairs it has had, then check ceilings and walls under the problem areas. On the roof we go over the field of the membrane or panels, every seam and lap, the edge metal, flashing at parapets and curbs, pitch pans around pipes and conduit, and the drains, scuppers and gutters.
Parapet walls get extra attention on Kingsville's flat-roofed buildings. Cracked coping, loose counterflashing and open joints in the wall itself let water in behind the membrane, and the leak can show up far from where it started. On tall or steep roofs, a drone takes the close-up photos.
Most repairs are ordinary: an open seam, a split boot, flashing pulled loose at a wall, a rooftop unit curb that was never sealed properly. Repair work goes on our regular calendar and can be a couple of weeks out in busy stretches, so calling at the first stain keeps a small leak from soaking the insulation.
A roof coating is a liquid membrane rolled or sprayed over the existing roof. It suits a roof that is weathered but still dry underneath. The old surface stays in place, so there is no tear-off and much less disruption for tenants, shoppers or students.
The infrared scan and core samples from our inspection, free on any building over 5,000 square feet, show whether your roof meets that test. Pockets of wet insulation have to be cut out and replaced first, and a roof that is wet across large areas is a candidate for replacement instead.
RISE is a GAF certified coating contractor. A qualifying GAF coating system can be registered for the GAF Emerald Pledge warranty, which runs 10 to 20 years based on how many mils of coating are applied.
A commercial roof in Kingsville often needs a yes from more than one person: an owner and a lender, a church finance committee, a school board or a landlord who lives out of town. Our written quote spells out the scope, the materials, the warranty terms and the schedule, so whoever signs off can set it beside other bids and compare them line by line.
The proposal stays open for about 15 days, and nothing in the price moves after signing. When the roof is finished, we walk it with you and hand over the permit, windstorm and warranty papers, including our 10-year workmanship warranty. That warranty covers our installation for the owner who signed; it does not pass to a buyer.
If a lender or insurer has asked for a roof condition report, mention it when you book the inspection so the photos and notes cover what they want to see. Drone photos are part of the report on tall or steep roofs.
We also replace roofs on Kingsville houses. We are an Owens Corning Preferred Contractor and install Owens Corning Duration shingles, and our DECRA and Tilcor certifications cover stone-coated steel; a DECRA roof by RISE on a ranch in Refugio was a 2025 Project of the Year finalist. Homeowners can ask about financing, which comes from Acorn Finance, a third-party lender, for those who qualify. Nearby, we also cover Robstown to the north and Alice to the northwest.
Yes. The city's permit guide says every new roof and re-roof needs a building permit, and the application calls for the property's appraisal card and a WPI-1 windstorm form. We prepare and file that paperwork as part of the job.
Yes. Kleberg County is one of the 14 first-tier coastal counties, so roof work in Kingsville is inspected to TDI's standards, and TDI issues a WPI-8 certificate when it passes. We arrange those inspections for you.
If a kitchen exhaust fan vents grease onto the roof, PVC is usually the better membrane because it resists oils. TPO is a reflective, economical choice for most other low-slope buildings in town.
Most owners get a written quote 24 to 48 hours after the free inspection. The proposal stays open for about 15 days, and the price is fixed once you sign.
🔒 Free, no-obligation quote — Price-locked estimate in 24–48 hrs
Trace your roof on satellite imagery and get a real installed price in under 60 seconds.
Powered by satellite roof measurement technology. No obligation.