Roof cost per square foot guide: new shingles going onto a roof

How Roof Cost Per Square Foot Works

Roof cost per square foot is the installed price of a new roof divided by the area of the roof surface. It is not based on the floor area of the house. Used that way, it is the easiest number for comparing materials and bids, as long as every bid measures the same roof and includes the same work.

This guide gives the installed prices RISE Roofing quotes around Corpus Christi for four common roof types, a worked example for a roof of 2,000 square feet, and the things that move a price up or down inside its range.

Our Installed Prices by Roof Type

These are our prices per square foot of roof surface, installed. Each one includes the work listed further down this page, from tear-off to cleanup.

Roof typeInstalled price per sq ft2,000 sq ft roofTypical life
3-tab shingles$3.50 to $5.50$7,000 to $11,00012 to 18 years
Architectural shingles (Owens Corning Duration)$4.50 to $7.00$9,000 to $14,00025 to 30 years
Standing seam metal$12 to $16$24,000 to $32,00050 to 70 years
DECRA stone-coated steel$12 to $16$24,000 to $32,00050+ years

Other roofs, such as impact-resistant shingle upgrades or tile, are priced on the quote for your home. You can read more about each type on our pages for asphalt shingle roofing, standing seam roofing and DECRA roofing.

Roofing Squares, Pitch and Measuring Your Roof

Roofers measure in squares. One roofing square is 100 square feet of roof surface, so a roof of 2,000 square feet is 20 squares. You will see the word on quotes, supply orders and insurance estimates.

Your roof is always bigger than the floor under it. It hangs past the walls at the eaves and rakes, and a sloped surface covers more area than the flat footprint beneath it. The steeper the slope, the bigger the gap. Pitch is written as inches of rise per 12 inches of run, and this table shows how much it adds:

Roof pitchMultiply the flat footprint by
4/12about 1.05
6/12about 1.12
8/12about 1.20
10/12about 1.30
12/12about 1.41

Here is how that works. A one-story house with an 1,800 square foot footprint, counting the overhangs, under a 6/12 roof has about 1,800 x 1.12 = 2,016 square feet of roof, or a little over 20 squares. Hips, valleys and dormers shift the total a bit, so we measure each roof instead of working from the floor plan.

How Pitch, Height and Shape Move the Price

Pitch changes more than the area. On a steep roof the crew works in harnesses, sets roof jacks to stand on and moves more slowly, and every bundle takes longer to place. A low, walkable roof goes faster.

Height works the same way. A two-story roof means more climbing, more care getting materials up and more time getting debris down safely.

Shape may matter most of all. Every hip, valley, dormer, chimney and skylight has to be cut around and flashed by hand. Two roofs with the same square footage can land at opposite ends of a price range when one is a plain gable and the other is cut up with valleys and dormers.

Tear-Off, Layers and Disposal

Tearing off the old roof and hauling it away is part of every quote we write. Along the coast, inside the Texas windstorm area, we always tear off the old roof before a new one goes on instead of laying new material over it. That way the deck gets a proper look before it is covered again.

More layers mean more work. A house with two layers of old shingles takes longer to strip, and it fills more of the dumpster than a house with one. That is one of the things that decides where a roof falls inside its price range.

Decking Is Priced Per Sheet, Outside the Signed Price

The deck is the layer of plywood or OSB the roof is fastened to. Nobody can judge its full condition from the top of the old roof, so rotten decking is the one cost that is not settled until tear-off.

Here is how we handle it. Rotten decking is priced per sheet on your quote, and it sits outside the signed price. When tear-off exposes bad wood, we replace the sheets that need it and charge for them at the rate already on your quote, and we can show you photos of what came off. You know the per-sheet price before you sign, even though nobody knows the count yet.

Soft spots underfoot, dark stains on the underside of the deck seen from the attic, or a roof line that dips between rafters can all point to decking that needs replacing.

Permits and Windstorm Inspections

A roof replacement in Corpus Christi needs a city permit, and on the coast it also has to meet the Texas windstorm code. Nueces County is part of the catastrophe area designated by the Texas Department of Insurance. In that area, most roof replacements are inspected while the work is under way, and TDI issues a WPI-8 certificate of compliance when the work passes.

We take care of the city permit and the TDI windstorm inspections as part of the job, so you are not chasing paperwork. The code also shapes the installation itself, including how the roof is fastened and how its edges are finished. TDI explains certificates and inspections on its windstorm inspections page, and our Texas windstorm insurance guide covers what the WPI-8 means for TWIA coverage.

Materials: The Biggest Driver of Roof Cost Per Square Foot

Asphalt shingles

Shingles have the lowest first cost. A 3-tab shingle is the cheapest and shortest-lived option, and architectural shingles cost a little more and last much longer. As an Owens Corning Preferred Contractor, we install all three Owens Corning Duration lines with six nails per shingle. Class 4 impact-resistant shingles such as Duration FLEX and Duration STORM can be priced on request, and they may earn an insurance premium credit that each insurer sets for itself.

Standing seam metal

Standing seam hides its fasteners under raised seams, out of the sun and salt spray. Per square foot it costs roughly two to three times what architectural shingles do, and it is expected to last about twice as long or more.

DECRA stone-coated steel

DECRA gives the look of tile, shake or shingles over a steel panel, and it falls in the same range as standing seam with us. RISE is a certified DECRA and Tilcor installer, and a DECRA roof we installed was named a 2025 DECRA Project of the Year finalist.

Cost over the life of the roof

Dividing the price by the expected life gives a rough cost per year. Architectural shingles on a roof of 2,000 square feet, at $9,000 to $14,000 over 25 to 30 years, come to roughly $300 to $560 a year. Standing seam at $24,000 to $32,000 over 50 to 70 years comes to roughly $340 to $640 a year. The yearly figures sit closer together than the sticker prices, so how long you plan to stay in the house matters.

What Every RISE Quote Includes

Every roof replacement quote we write includes:

  • Tear-off and disposal of the old roof
  • New underlayment
  • Drip edge
  • New flashing
  • Ridge ventilation
  • Full cleanup

The one thing outside the signed price is rotten decking, priced per sheet as explained above. The quote is written and price-locked, and it usually reaches you within 24 to 48 hours of the inspection. The price locks when you sign, the proposal holds for about 15 days, and the installation carries our 10-year workmanship warranty.

When you compare bids, line them up item by item. A lower price per square foot that leaves out tear-off, flashing or ventilation is not really a lower price.

Why Two Bids on the Same Roof Can Differ

When two roofers quote the same house and their numbers are far apart, the gap usually comes from one of a few places:

  • Measured area. One bid may measure the full roof surface, including overhangs and slope, while another works from a rough guess. Ask each roofer how many squares they measured.
  • Scope. Check whether the flashing is new or reused, whether drip edge and ridge ventilation are included, and whether tear-off and disposal are in the price.
  • Decking. Some bids carry an allowance, some price it per sheet and some never mention it. Ask how it is handled before you sign.
  • Product. A 3-tab shingle and an architectural shingle are different products at different prices. Make sure every bid names the same shingle line.
  • Warranty. Ask how many years the workmanship warranty runs and what it covers.

Once you know each bid's measured area and scope, turning every bid into a roof cost per square foot puts them on equal footing.

A Worked Example: 2,000 Square Feet of Roof

Say your roof measures 2,000 square feet, or 20 squares. At our installed prices:

  • 3-tab shingles: 2,000 x $3.50 to $5.50 = $7,000 to $11,000
  • Architectural shingles: 2,000 x $4.50 to $7.00 = $9,000 to $14,000
  • Standing seam metal: 2,000 x $12 to $16 = $24,000 to $32,000
  • DECRA stone-coated steel: 2,000 x $12 to $16 = $24,000 to $32,000

A simple, low-slope, one-story roof with one layer to remove sits toward the low end of each range. A steep two-story roof with valleys, dormers and two layers to strip sits toward the high end. Any rotten decking found at tear-off is added at the per-sheet rate on the quote, on top of the signed price.

How Insurance Fits In

If a storm damaged your roof and the damage is covered, your insurer pays based on its own estimate, minus your deductible. We document the damage with photos and give you a written estimate to send in. The adjuster sets the scope and decides coverage. When tear-off uncovers damage the approved scope missed, we send the insurer a supplement with photos.

Texas law does not allow a contractor to waive or rebate your deductible, so plan on paying it. Our article on whether insurance covers roof replacement explains what policies usually pay for.

Timing Your Roof Replacement

The Atlantic hurricane season lasts from June 1 through November 30. If your roof is close to the end of its life, aiming for late winter or spring leaves room for the work, the windstorm inspections and the certificate before storms start to form.

Roofs get replaced in every month of the year, but after a big storm many homeowners need a roofer at the same time and calendars fill up. Planning ahead gives you time to collect bids, compare them line by line and pick your material without a leak forcing the decision.

From a Calculator Estimate to a Firm Price

For a quick ballpark, our roof cost calculator lets you outline your roof on a satellite image and see an estimate. Treat that figure as a starting point; it is not a locked price.

For a firm price, book a free inspection. We measure the roof, check the attic and the underside of the deck when we can get to them, and use a drone on steep or tall roofs. Our roof replacement page walks through the job from tear-off to final cleanup. Financing is available through Acorn Finance, a third-party lender, for qualified homeowners; it spreads the cost over time rather than lowering it, and the details are on our roof financing page.

Frequently Asked Questions

With RISE Roofing, installed prices per square foot of roof are $3.50 to $5.50 for 3-tab shingles, $4.50 to $7.00 for Owens Corning Duration architectural shingles, and $12 to $16 for standing seam metal or DECRA stone-coated steel.

About $7,000 to $11,000 in 3-tab shingles, $9,000 to $14,000 in architectural shingles, and $24,000 to $32,000 in standing seam metal or DECRA. Rotten decking found at tear-off is extra, priced per sheet.

No. The roof is larger because of the overhangs and the slope. A 6/12 roof, for example, covers about 1.12 times the flat footprint beneath it.

Tear-off and disposal, new underlayment, drip edge, new flashing, ridge ventilation and full cleanup. Rotten decking is priced per sheet and sits outside the signed price.

No. The calculator gives a ballpark. The price locks when you sign a written quote after a free inspection, and proposals hold for about 15 days.

Need Roofing Help?

Free inspection, price-locked quote, 10-year workmanship warranty.

FREE TOOL
Trace Your Roof. Get an Instant Price.

Use satellite imagery to outline your roof and receive a real installed price — no signup, no obligation.

Get Instant Roof Price → Takes less than 60 seconds

🔒 Free, no-obligation quote — Price-locked estimate in 24–48 hrs

📞 (361) 204-5325 Free Instant Quote